Lucent Technologies lucent ユーザーズマニュアル
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-141
list mst
8
0xCF - message confirmation
This confirmation is X.25 far end confirmation.
Processor Channel Control
0xD0 - outgoing control message
Message events for R1:
0x00 - Request Reset of Logical Channel
0x05 - Ack. Reset of Logical Channel
0x06 - Flow Control Uplink
0x07 - Release Uplink Flow Control
0x0A - Flow Control Downlink
0x0B - Release Downlink Flow Control
0x05 - Ack. Reset of Logical Channel
0x06 - Flow Control Uplink
0x07 - Release Uplink Flow Control
0x0A - Flow Control Downlink
0x0B - Release Downlink Flow Control
Message events for R3:
0x00 - Request Reset of Logical Channel
0x08 - Connect Processor Channel
0x09 - Disconnect Processor Channel
0xD1 - X.25 incoming control message
0x08 - Connect Processor Channel
0x09 - Disconnect Processor Channel
0xD1 - X.25 incoming control message
R1 Message events:
0x01 - Performed Requested Reset of Logical Channel
0x06 - Resetting Logical Channel
0x0A - Level 3 Restart
0x06 - Resetting Logical Channel
0x0A - Level 3 Restart
1
R3 Message events:
1.
If this event occurs, one restart for each logical channel will be written into the MST trace.
Message[1]
= processor channel number
Message[2]
= internal buffer id
Message[3]
= count of outgoing buffers confirmed
Message[1]
= processor channel number
Message[2]
= message event
Message[1]
= processor channel number
Message[2]
= message event