Lucent Technologies lucent ユーザーズマニュアル
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-336
test ds1-loop
8
Output
The following example shows the output from the
test data-module 300
command. The responses display on a test-by-test basis with one line of data for
each test result.
each test result.
Field Definitions
test ds1-loop
This command validates that the board exists at the specified location and that
the board is a TN464F or TN767E or later suffix DS1 Interface board.
Long-duration loopback tests execute for an extended period of time until
manually terminated. Short-duration loopback tests return the result of the test to
the screen after executing. The
the board is a TN464F or TN767E or later suffix DS1 Interface board.
Long-duration loopback tests execute for an extended period of time until
manually terminated. Short-duration loopback tests return the result of the test to
the screen after executing. The
list measurements ds1 summary
command
can be used to monitor the status of a long-duration loopback/span test.
Port
Port address (cabinet-carrier-slot-circuit)
Maintenance
Name
The name of maintenance object
Alt. Name
Alternate way to identify maintenance objects.
If the Object is
The field contains
station
extension
trunk
xxx/yyy
(where
xxx
= trunk group number
and
yyy
= member number)
private CO line
P/xxx
(where
xxx
= private CO line group
number)
Test No
The test being executed
Result
Test result: Pass, Fail, Abort, No Board
Error Code
Numeric code explaining why the release failed or aborted. Refer
to the detailed list of the codes by test number for each MO.
to the detailed list of the codes by test number for each MO.
test data-module 300
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01C1103 PDMODULE 17 PASS
01C1103 PDMODULE 17 PASS
Command successfully completed