Patton electronic 2977 ユーザーズマニュアル

Driver installation for the Windows 2000 operating system

Model 2977 DialFire RAS User Guide 

Use this procedure to configure outgoing Dial-up Networking connections from your server to other systems. 
You should have already installed the Patton adapter and device driver. 

Procedure
1. From the 

 menu, choose 

. 

2. Choose 

 to start the Network Connection Wizard. 

3. Choose 

 and complete the wizard. 

4. Upon completion of the wizard, choose Properties if you wish to configure dialing rules (such as what 

number to dial to get an outside line) or to add alternate phone numbers to try if the primary number is 
busy.

Use this procedure to change the configuration of an installed adapter.

Procedure
1. From the 

 menu, choose 

. 

2. From the displayed list, choose DialFire RAS as your network adapter.

3. Choose the Patton adapter you wish to configure. 

4. From the Action menu, choose 

. 

5. Configure the adapter as necessary. 

6. If you changed the hardware resources from the default settings, Windows may notify you to restart the 

system to complete the configuration. 

If you left the hardware resources at their default values, the adapter is ready to use without restarting the 
system. 

Use this procedure once you have installed and configured the driver and now want to change the configura-
tion.

Phone and modem options that can be set with this procedure include:

•

Maximum Port Speed 

•

Speaker Volume 

•

Dial Control 

•

Wait for tone before dialing 

•

Extra Initialization Commands 

Procedure
1. From the 

 menu, choose 

. 

2. Choose a Patton modem device to configure.