Patton electronic 2977 ユーザーズマニュアル

Driver installation for the Microsoft Windows NT operating system

Model 2977 DialFire RAS User Guide 

5. Follow the prompts

Use this procedure to install a driver that you have downloaded from the Patton Electronics Support Web site 
(http://support.patton.com).

If you are installing multiple adapters, each adapter needs to be 
installed separately. You need to restart your computer before install-
ing another adapter.

Procedure
1. Log on to Windows NT as Administrator. 

2. From 

, choose 

. 

3. Do one of the following: 

– If this is the first time you have installed this driver, choose 

. 

– If you have installed an earlier version of this driver, choose 

. 

4. Enter the path to where the driver is stored and then choose 

. 

5. Choose the driver and then 

. 

6. Choose 

 on the Setup screen to complete installation. 

The adapter appears on the Network Adapters list. 

7. Choose 

 and restart the computer. 

Use this procedure to install the MS Loopback Adapter.

Procedure
1. From the Windows NT Control Panel, choose 

. 

The system displays the following prompt: Windows NT Networking is not installed. Do you want to install 
it now? 

2. Choose 

. 

The system asks if your computer is wired to the network or connected via Remote Access (modem). 

3. Choose 

 to the Network > Next > Select from list. 

4. Choose 

 from the dialog box and 

. 

5. Choose 

 as the network protocol and then 

. 

6. Install the default network services by choosing 

 

The system asks for a directory path. 

7. Enter either 

 (for Intel processors; use d:\alpha\ for Alpha systems) and load your Windows NT CD-

ROM. (This assumes that your CD-ROM drive is drive D.)