Patton electronic 2960 ユーザーズマニュアル

Completing the installation

Model 2960/2996 RAS User Manual 

To save the displayed data as a text file, select the 

 option on your browser (see 

). For example, 

under Netscape, select 

 > 

. A dialog box will display enabling you to save the contents of the export 

parameters to a text file. Select the location where you want the file stored, type a file name, and click 

.

Figure 36. Saving the access server flash memory configuration data as a text file

This section verifies that the RAS is fully operational.

1. Temporarily disconnect the male ends of both power cords from the power outlet. Wait 30 seconds, then 

plug the power cords in again.

2. Verify that the green POWER LED is lit. If the POWER LED is flashing green, refer to Chapter 5, “Trou-

3. Verify that the Link 1 Frame LED illuminates, indicating that the RAS is synchronizing with the T1/E1/

PRI signal.

4. Verify that after 5 seconds, the Link A Error LED begins flashing, indicating that the RAS is satisfied with 

the quality of the T1/E1/PRI signal.

5. Verify that after 10 seconds, the Link A Error LED extinguishes, indicating that the RAS is satisfied with 

the network signal and that the link is ready for use.