HP (Hewlett-Packard) HP EliteBook 2760p ユーザーズマニュアル

Audio connector board

649762-001

Before removing the audio connector board, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet,

and then unplugging the AC adapter from the computer.

Remove the following components:

a. Remove the battery (see 

b. Remove the service access cover (see 

Remove the WLAN module (see 

d. Remove the WWAN module (see 

e. Remove the keyboard (see 

)

Remove the top cover (see 

)

g. Remove the display assembly (see 

h. Remove the Bluetooth module (see 

Latch assembly (see 

Remove the speaker assembly (see 

)

Remove the audio connector board:

Position the computer right-side up, with the front toward you.

Release the ZIF connector (1) that secures the audio board cable to the system board and remove
the audio board cable (2).

76

Chapter 4   Removal and replacement procedures