HP (Hewlett-Packard) HP EliteBook 2760p ユーザーズマニュアル

Smart card reader

597839-001

Before removing the smart card reader, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet,

and then unplugging the AC adapter from the computer.

Remove the following components:

a. Remove the battery (see 

b. Remove the service access cover (see 

Remove the WLAN module (see 

d. Remove the WWAN module (see 

e. Remove the keyboard (see 

)

Remove the top cover (see 

)

g. Remove the display assembly (see 

h. System board shield (see 

)

Remove the smart card reader:

Position the computer right-side up, with the front toward you.

Disconnect the smart card reader cable from the ZIF connector (1) on the system board and
remove the cable (2).

78

Chapter 4   Removal and replacement procedures