Canon DR-2010C ユーザーズマニュアル
DR-2010C / DR-2510C
DR-2010C / DR-2510C
23
When scanning multiple page documents that are fastened together, such as
invoices, place the documents so that the edge that is fastened together is
facing down.
invoices, place the documents so that the edge that is fastened together is
facing down.
1
Switch the feed selection lever to
(Bypass).
2
Adjust the document guides to fit the width of the document to be scanned
(See p.21).
(See p.21).
3
Place the document with the reverse side facing you, and the top of the
document facing down (See p.21).
document facing down (See p.21).
IMPORTANT
After you finish scanning, close the document feed tray and the document eject
tray to prevent damage to the scanner while it is not being used.
tray to prevent damage to the scanner while it is not being used.
1
Switch the feed selection lever to
(Bypass).
CAUTION
When scanning cards, make sure to set the feed selection lever to
(Bypass),
and scan the cards one at a time.
2
Adjust the document guides to fit the width of the card to be scanned (See
p.21).
p.21).
Feeding in the Bypass Mode
Placing Cards