Canon DR-2010C ユーザーズマニュアル

Previous Page Next Page

•

When scanning folded documents, switch the feed selection lever 
to

(Bypass).

•

When placing folded documents, place the document into the scanner so that 
the fold is on the right side. The side of the folded document facing you will 
become the right side of the combined image.

•

When scanning folded documents, click the [Basic] tab of the ISIS/TWAIN 
driver 

→ click [Folio] in the [Scanning Side] box → click [OK]. 

(See Chapter 4, "ISIS/TWAIN Driver Settings.")

•

The maximum size for the combined image is 11" X 17"/A3. When using the 
Folio function for an irregular document size, click the [Basic] tab of the 
ISIS/TWAIN driver 

→ click [Auto-detection] in the [Page Size] box → click 

[OK].

When scanning with the DR-2010C/DR-2510C, in addition to scanning from an 
application, you can also use the Job function to perform scanning by pressing a 
scan button. This section describes the procedures for scanning using the 
CapturePerfect 3.0 software included with the scanner, scanning using the Job 
function, and other special scanning. For information on installing the various 
applications and drivers, see the Easy Start Guide, or Chapter 2, "Setup." For 
details on scan settings, see Chapter 4, "ISIS/TWAIN Driver Settings."

This section describes how to start CapturePerfect 3.0, select the scanner, and scan 
documents.
The Scan Batch to File function is used here as an example.
For details, see the CapturePerfect 3.0 Operation Guide and CapturePerfect Online 
Help.

From the Windows task bar, click [Start] 

→ point to [All Programs] → 

[CapturePerfect 3.0] 

→ click [CapturePerfect 3.0].