Canon DR-2010C ユーザーズマニュアル

DR-2010C / DR-2510C

This section describes the procedure for setting to omit borders and ruled lines
of a specified color (red, green, or blue) from the scanned image.

NOTE

If you select [24-bit Color] or [Auto Color Detection] from the [Mode] drop-down
list in the [Basic] tab, you cannot specify this setting.

In the ISIS/TWAIN driver properties dialog box, click the [Image
processing] tab

→ select the color to omit from the [Front] and [Back]

drop-down lists under Color drop-out, as necessary.

NOTE

You can specify different settings for the front and back side of the document.

This section describes the procedure for setting the scanner to enhance the red
color when performing black-and-white scanning.

NOTE

If you select [24-bit Color] or [Auto Color Detection] from the [Mode] drop-down
list of the [Basic] tab, you cannot specify this setting.

In the ISIS/TWAIN driver properties dialog box, click the [Image
processing] tab

→ select [Red Enhance] from the [Front] and [Back]

drop-down lists under Color drop-out.

NOTE

You can set specify different settings for the front and back side of the document.

Omitting a Specific Color

Enhancing the Red Color