Toshiba 451C ユーザーズマニュアル
5. Troubleshooting
344
Printing Guide — Printer Driver Errors
This Port is Currently in Use
Problem Description
The driver was either open, printing a job, or is in use by another printer or application,
when you attempted to delete it.
The driver was either open, printing a job, or is in use by another printer or application,
when you attempted to delete it.
Corrective Action
Make sure all print jobs have completed before deleting a port. If there are still prob-
lems, exit all applications and try again. Check each driver to see if another driver is
using the same port. If so, first change the driver’s port setting and delete the port.
Make sure all print jobs have completed before deleting a port. If there are still prob-
lems, exit all applications and try again. Check each driver to see if another driver is
using the same port. If so, first change the driver’s port setting and delete the port.
Problem with the Current Printer Setup
Problem Description
The driver was not set up properly, possibly because the installation procedure did not
complete.
The driver was not set up properly, possibly because the installation procedure did not
complete.
Corrective Action
Delete the driver and either reinstall it from the distribution CD-ROM or download it from
this equipment.
Delete the driver and either reinstall it from the distribution CD-ROM or download it from
this equipment.
Printer Driver General Errors
Driver Mapped to Wrong Port
Problem Description
If the printer driver on a client workstation points to the wrong network port, jobs do not
appear in the current jobs queue or print out.
If the printer driver on a client workstation points to the wrong network port, jobs do not
appear in the current jobs queue or print out.
Corrective Action
1. Open the Printers folder from the Control Panel.
2. Right-click the printer driver icon.
3. Select Properties from the shortcut menu.
4. Depending on the operating system, select the following tab:
1. Open the Printers folder from the Control Panel.
2. Right-click the printer driver icon.
3. Select Properties from the shortcut menu.
4. Depending on the operating system, select the following tab:
-
In Windows 98/Me — Select Details. Browse to select the printer or Novell
queue.
queue.
-
In Windows NT 4.0/2000/XP/Server 2003 — Select Ports. Add a new port and
map it to the printer.
map it to the printer.
5. Make sure that the path to the printer and the device name are correct.
\\<device name>\print
-
-
Where <device name> is the same as the device name set from the Touch
Panel Display.
Panel Display.
6. Click the General Tab and click Print Test Page to confirm that the settings are cor-
rect.