Sharp AR-M257 ユーザーズマニュアル

■ Has the printer driver been specified to suit both 

You can select "Draft", "Normal" or "Photo" for the print 
quality in the "Advanced" tab of the printer driver setup 
screen. When "Photo" is selected, you can click the "Image 
Adjustment" button and adjust the brightness and contrast in 
the dialog box that appears. Adjust these settings 
appropriately for your print data and try printing again.

■ Is the paper loaded correctly?

If a document is physically damaged when it is output or the 
image is skewed on the paper, discard the damaged sheet, 
reinsert the paper supply and print again. Insert the paper so 
that there is no visible space between the paper and the 
paper guides.

☞

See the operation manual for copier for more details on 
inserting paper.

■ Did you set sufficient margins in the paper settings 

Printing is not possible at the edges of the paper. The print 
margins are 5/32" (4 mm) at the top and bottom of the paper 
and 1/8" (3 mm) at the sides of the paper. When configuring 
the paper settings in the software application, be sure to 
establish margins that are at least as large as the print 
margins.

■ Is the paper size loaded in the tray the same as that 

Check if the "Paper Size" options suit the size of the paper 
loaded in the tray.
If the "Fit To Page" setting is activated, make sure that the 
paper size selected from the drop-down list of the "Fit To 
Paper Size" option is the same as the size of the loaded 
paper.

■ Is the orientation of document setting correct?

Click the "Paper" tab in the printer driver setup screen, and 
verify if the "Image Orientation" option is set to your 
requirements.