Genie 1500 ユーザーズマニュアル

Lubricate the drive screw:
 

s  Wipe off old grease using a lint-free cloth.

 

s  Apply a light coating of silicon based grease 

 

  (For best results, use Genie® GLU-R).

9

©2011 The Genie Company

 

 

9/2011

TO ENGAGE, PULL
DOWN AND TOWARD
THE OPENER. THEN LET GO. 

TO DISENGAGE, PULL
DOWN ON THE RELEASE 
HANDLE AND LET GO.

 

 

 

s   When replacing light cover, make sure wires are 

not pinched or near moving parts.

s   Use extreme caution when working from a ladder 

or step stool.

 

1.  Disconnect power to door opener.

s

 

– Do NOT use light bulbs with greater than 

100 Watt rating.

s

2.  Reconnect power to door opener.

s

Performing all ten (10) Limits/Force setting steps 
(page 5) erases previous Limits/Force settings.

Replace remote battery with a  
CR 2032 coin cell battery.
1.  Open the remote case using a

washer or coin that fits into the

 

slot at the top of the remote. 

2. Replace battery.
3.  Align components and 

snap case closed.

OPENER