Graco 16H245 ユーザーズマニュアル

Unclogging Spray Tip/Guard Assembly

3A1698F

15

1.

To unclog tip obstruction, engage trigger lock and 
put prime/pressure relief valve UP to release pres-
sure.

2.

Reverse spray tip to UNCLOG position.

3.

Aim sprayer at waste area, disengage trigger lock, 
and put prime/pressure relief valve DOWN to spray 
position. Pull trigger to clear clog.

4.

Engage trigger lock. Put prime/pressure relief valve 
UP to release pressure and rotate spray tip back to 
SPRAY position.

5.

Disengage trigger lock, put prime/pressure relief 
valve DOWN to spray position, and resume spray-
ing.

6.

If tip is still clogged, you may have to repeat steps 
1 - 5 and rotate the tip from SPRAY to UNCLOG 
several times. Repeat step 1 to release pressure, 
remove and clean filter, or replace with new tip 
assembly. 

NOTE: Filter assembly is reverse-threaded:
Turn left (or counter-clockwise) to install.
Turn right (or clockwise) to remove.

7.

When obstruction is cleared, engage trigger lock 
and rotate arrow-shaped handle back to SPRAY 
position.

Do not operate or spray near children. Do not aim the 
sprayer at, or spray any person or animal. Keep hands 
and other body parts away from the discharge. For 
example, do not try to stop leaks with any part of the 
body.

ti14994a

ti14999a

ti16699a

ti16700a

ti14991a

ti14991a

ti14995a

ti15425a

ti16698a

ti16701a

ti14994a

ti14999a

ti16700a

ti16992a

Make sure filter is completely screwed into the Tip/Guard 
Assembly to avoid damage to the filter. Do not use a 
damaged filter or poor sprayer performance may result.

ti14995a

ti15425a

ti16698a

ti16701a

ti14989a

ti14989a

ti14985a

ti14994a

ti16699a

ti16992a