Hitachi NV 83A3 ユーザーズマニュアル

ページ / 60
15
English
(1)  Intermittent operation (Trigger fi re)
  Use the SINGLE SEQUENTIAL ACTUATION 
MECHANISM setting.
 WARNING
● For intermittent operation, set the switching 
device  to  the  leftward  position  completely. 
(i.e. Set to SINGLE SEQUENTIAL ACTUATION 
MECHANISM.)
●  To avoid double fi ring or accidental fi ring due 
to recoil.
1) Set the switching device to SINGLE 
SEQUENTIAL ACTUATION MECHANISM.
2)  Pull the trigger rapidly and fi rmly.
1
 Set the switching device to the leftward position 
(to set to SINGLE SEQUENTIAL ACTUATION 
MECHANISM).
  (Set the switching device to the leftward position 
completely as shown in the diagram. Otherwise, 
it will be set to CONTACT ACTUATION 
MECHANISM.)
2
 Position the nail outlet on the workpiece with 
fi nger off  the trigger.
3
 Depress the push lever fi rmly until it is completely 
depressed.
4
 Pull the trigger to drive a nail.
5
 Remove fi nger from the trigger.
To continue nailing in a separate location, move the nailer 
along the wood, repeating steps 2 – 5 as required.
1
 Leftward position
Switching device
Push Lever
3
4
Trigger
 WARNING
● A nail will fi re each time the trigger is 
depressed as long as the push lever remains 
depressed.
(2)  Continuous operation (Push lever fi re)
 
Using CONTACT ACTUATION MECHANISM
 WARNING
●  To avoid double fi ring or accidental fi ring due 
to recoil.
1)  Do not press the nailer against the wood with 
excessive force.
2)  Separate  the  nailer  from  the  wood  as  it 
recoils after nailing.
1
 Set the switching device to the rightward position 
(to set to CONTACT ACTUATION MECHANISM).
  (Set the switching device to the rightward position 
completely as shown in the diagram. Otherwise, it 
will not operate properly.)
2
 Pull the trigger with the Nailer off  the workpiece.
3
 Depress the push lever against the workpiece to 
drive a nail.
4
 Move the Nailer along the workpiece with a 
bouncing motion.
  Each depression of the push lever will drive a nail.
  As soon as the desired number of nails have been 
driven, remove fi nger from the trigger.
1
 Rightward position
Switching device
Previously pull 
the trigger
2
4
000Book_NV83A3_US.indb   15
000Book_NV83A3_US.indb   15
2011/07/24   10:31:15
2011/07/24   10:31:15