Hitachi NV 83A3 ユーザーズマニュアル

English

Lubricate the feeding surfaces of the nose and

the nail guide after cleaning.

This promotes smooth operation and prevents

rust.

CAUTION

● Check that the main nail stopper and sub nail

stopper slide smoothly by pushing them with

fi nger.

If not smooth, nails can be driven at an irregular

angle and hurt someone.

4. Inspecting the magazine

DISCONNECT AIR HOSE.

Clean the magazine. Remove dust or wooden tips

which may have accumulated in the magazine.

5. Storing

○ When not in use for an extended period, apply a

thin coat of the lubricant to the steel parts to avoid

rust.

○ Do not store the Nailer in a cold weather

environment.

Keep the Nailer in a warm area.

○ When not in use, the Nailer should be stored in a

warm and dry place.

Keep out of reach children.

6. WARNING

LABEL

Change the WARNING LABEL if missing or

damaged.

A new WARNING LABEL is available from a Hitachi

authorized service center.

Warning

Label

7. Maintenance chart (See page 19)
8. Operator troubleshooting (See page 19)

9. Service parts list

CAUTION

● Repair, modifi cation and inspection of Hitachi

Power Tools must be carried out by a Hitachi

Authorized Service Center.

This Parts List will be helpful if presented with

the tool to the Hitachi Authorized Service Center

when requesting repair or other maintenance. In

the operation and maintenance of power tools,

the safety regulations and standards prescribed

in each country must be observed.

MODIFICATIONS:

Hitachi Power Tools are constantly being improved

and modifi ed to incorporate the latest technological

advancements.

Accordingly, some parts may be changed without prior

notice.

SERVICE AND REPAIRS

WARNING

● Only service personnel trained by Hitachi,

distributor or employer shall repair the Nailer.

● Use only parts supplied or recommended by

Hitachi for repair.

All quality Nailers will eventually require servicing or

replacement of parts because of wear from normal use.
NOTE: Specifi cations are subject to change without any

obligation on the part of HITACHI.

000Book_NV83A3_US.indb 18

2011/07/24 10:31:16