Echo GT-2000 ユーザーズマニュアル

Before operation a complete check of the unit must be performed;

• Check unit for loose/missing nuts, bolts and screws. Tighten and/or

replace as needed.

• Inspect fuel lines, tank and area around carburetor for fuel lieaks. DO

NOT operate unit if leaks are found.

• Inspect shield for damage and ensure that the cut-off knife is securely

in place. Replace if either is damaged or missing.

• Check that the cutting attachment is firmly attached and in safe

operating condition.

• Check that front (loop) handle and shoulder strap/ or shoulder/waist

harness are adjusted for safe, comfortable operation. See Assembly
for proper adjustment.

• Have repairs done only by an authorized ECHO Service Dealer.

• Do not use any attachment, accessory or replacement part unless it is

recommended in the Operator's Manual.

• Review the area to be trimmed. Look for hazards that could contribute

to unsafe conditions.

• Spectators and fellow workers must be warned, and children and

animals prevented from coming nearer than 15 m (50 ft.) while the
trimmer is in use.