Oregon HT255 ユーザーズマニュアル

24

OREGON® CORDLESS TOOL SYSTEM 

HEDGE TRIMMER MODEL HT255

AD 0213 - F/N 558936

Low cut time per 

battery charge

Cutting blades are dull

Have the cutting blades professionally sharpened.

Worn cutting blades

Have the cutting blades replaced at an approved 
service location. 

Bent cutting blades

Have the cutting blades replaced at an approved 
service location.

Improper cutting 
technique

Follow guidelines in “Basic cutting”. 

Higher cutting speed 
than necessary

Apply less pressure to the throttle trigger. 

Resin buildup 
preventing cutting 
blade movement

See “Blade care”.

Battery pack not fully 
charged

See “Charging the battery pack”.

Blinking orange 

light on charge 

state indicator

Charger short circuit, 
charger over current, 
over voltage limit, open 
circuit on battery pack, 
or charge/pre-charge 
time out error

1.  Make sure the charger cord is connected to both 

the charger and the electrical outlet. 

2.  Make sure the charger is receiving the correct 

voltage. 

3.  Try charging another battery pack designed for 

this charger. 

If this does not correct the problem, have the 
function checked at an approved service location.