Husqvarna 325HS99X ユーザーズマニュアル

 

English

 

 – 7

 

Loosen the nuts on top of the bar. Align the bolts in the holes 
on the catcher and fit the bolts. Adjust the blades' contact 
pressure according to the instructions under the heading 
Blades

 

•

The gear housing gets hot when the machine has been in 
use. To avoid burning yourself do not touch the gear 
housing.

 

•

The gear housing and clutch drum must be fitted before 
the machine is started, otherwise the clutch can come 
loose and cause personal injury.

•

Never start the machine indoors. Exhaust fumes can be 
dangerous if inhaled.

•

Observe your surroundings and make sure that there is no 
risk of people or animals coming into contact with the 
cutting equipment.

•

Place the machine on the ground, ensure the cutting 
attachment is clear of twigs and stones. Hold the body of 
the machine on the ground using your left hand 
(CAUTION! Not with your foot). Then grip the starter 
handle with your right hand and pull the starter cord. 

 

•

Always use a fuel container with an anti-spill valve.

•

Never refuel the machine while the engine is running. 
Always stop the engine and let it cool for a few minutes 
before refuelling.

•

Make sure there is plenty of ventilation when refuelling or 
mixing fuel (petrol and 2-stroke oil).

•

Move the machine at least 3 m from the refuelling point 
before starting it.

•

Never start the machine: 

-

If you have spilt fuel on it. Wipe off the spillage and 
allow remaining fuel to evaporate.

-

If you have spilt fuel on yourself or your clothes, 
change your clothes. Wash any part of your body that 
has come in contact with fuel. Use soap and water.

-

If the machine is leaking fuel. Check regularly for leaks 
from the fuel cap and fuel lines.

-

Avoid all skin contact with fuel. Fuel is a skin irritant 
and may even cause skin changes.

IMPORTANT! The machine is only designed for cutting 
branches and twigs.

Never use the machine if you are tired, if you have drunk 
alcohol, or if you are taking medication that could affect your 
vision, your judgement or your co-ordination.

Wear personal protective equipment. See instructions 
under the heading Personal protective equipment.

Never use a machine that has been modified in any way 
from its original specification.

Never use the machine in extreme weather conditions such 
as severe cold, very hot and/or humid climates.

Never use a machine that is faulty. Carry out the checks, 
maintenance and service instructions described in this 
manual. Some maintenance and service measures must be 
carried out by trained and qualified specialists. See 
instructions under the heading Maintenance.

All covers and guards must be fitted before starting. Make 
sure the spark plug cap and HT lead are not damaged. 
Otherwise you could get an electric shock.