Husqvarna 536 LIR ユーザーズマニュアル

ページ / 28
22 – English
MAINTENANCE
Troubleshooting schedule
Troubleshooting takes place from the keypad.
Keypad
Troubleshooting the battery and/or the battery charger during charging.
Battery
Battery charger
Control panel
Possible faults
Possible action
Green activate LED flashing.
Low battery voltage.
Charging the battery
Error LED flashes.
The power trigger and the activate 
button are pressed at the same 
time.
Release the power trigger and the 
machine is active.
Overload.
The trimmerhead is jammed.
Remove the battery from the 
machine. Release the trimmer 
head from grass.
Temperature deviation.
Allow the machine to cool down.
The machine will not run
Dirt in battery connectors.
Clean with compressed air or a soft 
brush.
Error LED is lit with red light. 
Service
Contact your service agent.
LED display
Possible faults
Possible action
Green activate LED flashing.
Low battery voltage.
Charge the battery
Error LED flashing.
The battery is discharged.
Charge the battery
Temperature deviation.
Use the battery in surroundings 
where temperatures are between -
10 
°
C and 40 
°
C.
Over voltage. 
Check that the mains voltage 
corresponds with that stated on the 
rating plate on the machine.
Remove the battery from the 
battery charger.
Error LED is lit.
Cell difference too much (1V). 
Contact your service agent.
LED display
Possible faults
Possible action
Error LED flashing.
Temperature deviation.
Use the battery charger only when 
the surrounding temperature is 
between 5 
°
C and 40 
°
C.
Error LED is lit.
Contact your service agent.