Tascam DP-008ex ユーザーズマニュアル

When using this unit, “assigning inputs” means setting 

the recording source for each track to either INPUT A 

or INPUT B on the 

INPUT ASSIGN

 screen.

This unit can simultaneously record a maximum of 

two tracks. You can also record one input channel to 

two tracks simultaneously (in this case, you cannot 

use the other input channel).
You cannot assign two inputs to the same track. 
1.  When the recorder is stopped, press the ASSIGN 

button to open the 

INPUT ASSIGN

 screen.

2.  Use the REC buttons of each track to set their 

input sources.

   Settings:
 

  A (INPUT A, default value for tracks 1, 3, 5 and 7) 

 

  B (INPUT B, default value for tracks 2, 4, 6 and 8)

3.  When finished making settings, press the HOME 

button to return to the Home Screen.

INPUT A and INPUT B each have a two-band 

equalizer (EQ).
Use the 

INPUT SETTING

 screen to set the input 

equalizers.
1.  Press the INPUT SETTING/EQ/DYN button to 

open the 

INPUT SETTING

 screen.

2.  Press the F2 [EQ] button to open the 

INPUT EQ

 

screen.

 

The input equalizer has the following setting 

items.

EQ-SWITCH 

(input equalizer switch)

ON/OFF 

(default: OFF)

Hi-F 

(high frequency range)

1.7 kHz – 18 kHz 

(default: 5 kHz)

Hi-G 

(high range gain)

±12 dB 

(default: 0.0 dB)

Lo-F 

(low frequency range)

32 Hz – 1.6 kHz 

(default: 350 Hz)

Lo-G 

(low range gain)

±12 dB 

(default: 0.0 dB)

 

Use the F2 [gt] button to switch between 

INPUT A and B.

 

Use the F3 [5] and F4 [b] buttons to select 

setting items, and use the DATA wheel to adjust 

them.

 

Press the F1 [BACK] button to return to the 

INPUT SETTING screen.

3.  After making the settings, press the HOME 

button to return to the Home Screen.

Icons when input 
equalizers are ON