Tascam DP-008ex ユーザーズマニュアル

3.  Press the REPEAT button again to stop repeat 

playback. The 

 icon on the Home Screen 

disappears.

 

The next section explains how to set the repeat 

interval that determines the amount of time 

until playback starts again after the OUT point is 

reached.

I/O Too Short

message appears when you press the REPEAT 

The time between repetitions (repeat interval) can be 

set from 0.5 to 9.9 seconds. 
1.  Press the MENU button to open the 

MENU

 screen. 

2.  Use the DATA wheel to select (highlight) the 

PREFERENCE

 menu item, and press the F4 [t] 

button to open the 

PREFERENCE

 screen. 

3.  Use the F3 [5] and F4 [b] buttons to select 

(highlight) the 

Repeat Int

 item setting value, 

and use the DATA wheel to set the value between 

1.0sec

 (default value) and 

9.9sec

 (in 0.1-second 

increments).

4.  After making the setting, press the HOME button 

to return to the Home Screen.

When the home screen is open, press the F1 button 

while pressing and holding the Stop (8) button 

to locate to the IN point. Press the F2 button while 

pressing and holding the Stop (8) button to locate 

to the OUT point.

Punching in/out is a technique to replace a part of an 

already recorded track.
Start playback and when you reach the part that you 

want to replace, switch to record (punch in), then 

switch back to the Play (or stop) when you finish the 

part that you want to replace (punch out).
1.  Decide what part of the track you plan to replace 

and choose a point to begin where the new 

recording can sit well with the existing recording.

2.  Press the REC button of the TRACK that you plan 

to replace part of to start record standby (REC 

indicator blinks).

3.  Start playback before the part of the track that 

you want to replace.

4.  Press the Record (0) button to start recording 

(punch in) when you reach the part. Play or sing 

what you want to record.

5.  Press the Play (7) button to switch to playback 

(punch out) when you finish the replacement 

recording.

You can also press the Stop (8) button to punch 

You can use a foot switch (standard plug) connected 

to the FOOT SWITCH jack on the rear panel to punch 

in and out.
In step 4 above, press the foot switch instead of the 

Record (0) button. In step 5, press the foot switch 

again instead of the Play (7) button.

Foot switch (standard jack)