Tascam DP-008ex ユーザーズマニュアル

Set the foot switch polarity on the 

PREFERENCE

 

screen.
Connect the foot switch, and, without pressing it, set 

FootSW Polarity

 to 

OFF

. This will set the unit to 

operate properly for the polarity of the connected 

foot switch.
1.  Connect a foot switch to the FOOT SWITCH jack 

on the rear panel.

2.  When the recorder is stopped and the Home 

Screen is open, press the MENU button to open 

the 

MENU

 screen.

3.  Use the data wheel to select (highlight) 

PREFERENCE

, and press the F4 [t] button to 

open the 

PREFERENCE

 screen.

4.  Use the F3 [5] and F4 [b] buttons to select 

(highlight) 

FootSW Polarity

.

5.  While not pressing the foot switch, use the data 

wheel to select 

OFF

.

6.  After making the setting, press the HOME button 

to return to the Home Screen.

When IN and OUT points are set, press the Record 

(0) button and the IN/ OUT button at the same time 

to enter auto punch in/out mode. The 

 icon 

appears near the top of the Home Screen when in this 

mode.

auto punch 
in/out mode

Auto punch in/out mode has a rehearsal function. 

When using this function, you can monitor between 

the IN and OUT points as though recording without 

actually recording.

Before punching in and out to record, you can 

rehearse. When rehearsing, you can monitor as 

though recording without recording.
1. Press 

TRACK REC buttons to use auto punch in/

out with those tracks.

2.  After setting the IN and OUT points, press the 

Record (0) and IN/OUT buttons at the same 

time to enter auto punch in/out mode.

3.  Press the Play (7) button.
 

Playback begins two seconds before the IN point, 

and the monitored sound switches at the IN point 

from the track playback sound and the input 

sound to just the input sound. The Record (0) 

indicator blinks when between the IN and OUT 

points.

 

When playback reaches the OUT point, the 

monitored sound includes the track playback 

sound with the input sound again, and the 

Record (0) indicator stops blinking and turns off. 

Playback automatically stops one second after 

the OUT point.

 

You can rehearse again until you are satisfied.

When you are done rehearsing, you can use auto 

punch in/out to record.
1.  While in auto punch in/out mode, press and hold 

the Record (0) button, and press the Play (7) 

button.

 

In the same way as during rehearsal, playback 

begins two seconds before the IN point. 

 

Recording occurs and the Record (0) indicator 

lights between the IN and OUT points.

2.  One second after reaching the OUT point, the 

recorder automatically stops, auto punch in/

out mode ends and the transport locates to two 

seconds before the IN point.