Tascam D01175220A DP-006 ユーザーズマニュアル

TASCAM DP-006

6 – Basic Recording

OL indicators and level meters

The audio levels of this unit can be checked using the INPUT A/B OL

indicators and the level meters on the display.
The level meters allow the signal levels to be checked, and they can also be

used to confirm whether signals are being input into the unit. For example,

if the and level meters are moving a signal is being input into the unit

even if you cannot hear anything when you are monitoring with headphones

or an external monitoring system (powered monitor speakers or an amplifier

and speakers). In this case, something other than this unit is probably the

reason that sound is not being output.
As shown below, if a “–” appears at the top of a level meter, the input is

overloading (these “–” indicators will automatically disappear after a while). In

this case, the sound might be distorted, so lower the level until the “–” stops

appearing.
If an OL indicator lights, the input source signal could be too loud or the

LEVEL knob set too high.
If the OL indicator lights even if the LEVEL knob is set to MIN, the input

source signal is too high, so lower the volume on the input source.

Overload indicators

Input level meters (A/B)

The and level meters on the display show the input levels of this unit’s

INPUT A and INPUT B.
Use the INPUT A/B LEVEL knobs, INPUT SETTING screen settings and the

output volume controls of the input sound source to adjust the levels.

NOTE

If an INPUT A/B OL indicator lights even though the INPUT A/B level

meters shows a suitable level, the input signal is too strong and the sound

is distorted. Lower the output volume of the input sound source.

TRACK level meters (1–4)

These meters show either playback signal levels or the track input signal

levels, depending on the operation status, as shown below.

REC indicator

Transport status

Signals shown

by level meters

Unlit

Playing back

Track playback

Blinking

(recording standby)

Playing back

Track playback

Stopped

Track input

Lit (recording)

Recording

Track input

NOTE

When the playback signal is shown, the level of the recorded signal of the

track is shown, so the level shown by the meters cannot be changed. When

the input signal is being shown, the INPUT A/B LEVEL knobs can change

the levels shown by the level meters.

Stereo level meters (L/R)

These show the stereo bus output level of this unit. Adjust the output level

with the MASTER LEVEL knob.

NOTE

When an input source is a built-in mic, if the REC indicator is not lit on

a track that has the built-in mic as its recording source, the input sound

cannot be heard.