KitchenAid 119 ユーザーズマニュアル

ページ / 19
11
Cycle Selection Charts
Select the wash cycle and options desired. Or press START to 
repeat the same cycle and options as the previous cycle.
NOTE: If the last cycle you completed was a rinse cycle, the 
dishwasher will run the last full wash cycle and options that you 
selected when you press Start. 
If the power is off or the door is open for an extended period 
of time, the Start button memory will default to the Normal 
cycle with heated drying.
If you do not run the dishwasher daily, close the door to 
maintain memory.
A “●” shows what steps are in each cycle. 
Temperatures indicate where extra heat is added.
Water usage is shown in U.S. gallons/liters.
This model meets the E
NERGY
 S
TAR
®
 guidelines for energy 
efficiency.
Cycle time includes dry time. An asterisk ( * ) by the cycle time 
indicates the cycle time might be longer depending on the 
temperature of the water entering the dishwasher. The cooler the 
water, the longer the cycle time. If the water is already hot 
enough, the cycle time will be as shown.
A small amount of water is run through the pump to remove 
soil particles between the main wash and final rinse.
Canceling a Cycle
Anytime during a cycle, press
Cancel glows. The dishwasher starts a 2-minute drain (if needed). 
Let the dishwasher drain completely. The light goes off when the 
dishwasher finishes the drain.
To stop the drain
You can press Cancel again to stop the drain immediately. 
Remember to drain the dishwasher before starting a new cycle.
To clear the indicators
Press Cancel before starting the dishwasher to clear all options 
and cycles.
Changing a Cycle or Setting
During the first minute of a cycle
Press a new cycle and/or options.
After the first minute of a cycle
1. Press
Cancel glows. The dishwasher starts a 2-minute drain (if 
needed). Let the dishwasher drain completely.
2. Check the detergent dispensers. If the main wash cup has 
opened and the detergent washed away, refill the cups as 
needed.
3. Close the door.
4. Press a new cycle and/or options. 
5. Press START.
Adding Items During a Cycle
You can add an item anytime before the main wash starts. Open 
the door and check the detergent dispenser. If the cover is still 
closed, you can add items.
To add items
1. Lift up the door latch to stop the cycle. Wait for the spraying 
action to stop before opening the door.
2. Open the door. If the detergent dispenser cover is still closed, 
add the item.
3. Close the door firmly until it latches. The dishwasher resumes 
the cycle after about a 5-second pause.
Use this cycle for 
heavily-soiled pots, 
pans, casseroles, 
regular tableware and 
harder than normal 
water conditions.
Use both detergent 
dispenser sections.
Pre-
Wash
Main 
Wash
Rinse
Rinse
Final 
Heated 
Rinse
Dry
Time
(min)
Water 
Usage
(gal/L)
130°F 
(54°C)
140°F 
(60°C)
140°F 
(60°C)
89*
6.9/26
Use this cycle for loads 
with normal amounts of 
food soil. (The energy-
usage label is based on 
this cycle.) 
Use both detergent 
dispenser sections.
Pre-
Wash
Main 
Wash
Purge†
Rinse
Final 
Heated 
Rinse
Dry
Time
(min)
Water 
Usage
(gal/L)
120°F 
(49°C)
140°F 
(60°C)
79*
5.9/22.3
Use this rinse cycle for 
rinsing dishes, glasses, 
and silverware that will 
not be washed right 
away.
Do not use detergent 
with this cycle.
Pre-
Wash
Rinse
Main 
Wash
Rinse
Final 
Heated 
Rinse
Dry
Time
(min)
Water 
Usage
(gal/L)
10
1.8/7