Electrolux 506030 ユーザーズマニュアル

14

Setting the activation time:

Exit from programming mode:

-

if 

dEt=181

 

 only oper-

ates during 

 operation; terminals 

of the main terminal box are powered at the same 
time.

-

if 

dEt=182

 

 only oper-

ates during 

 operation for restor-

ing the boiler level; terminals 

 of the main 

terminal box are powered at the same time.

-

if 

rAi=61

 

 only operates 

during 

 operation for restoring the 

boiler level; terminals 

 of the main terminal 

box are powered at the same time.

-

if 

rAi=62

 

 only operates 

during 

 operation; terminals 

 of 

the main terminal box are powered at the same time.

For connections, see the wiring diagram.

Supposing that an external detergent dispenser has 
been connected with a tank concentration measuring 
sensor, a standard setting could be as follows:

dIn=0

 the dispenser is not activated during filling of 

the tank.

dEt=181

 the dispenser is activated during wash 

pump operation and, thanks to the concentration mea-
sured by the conduction sensor, the correct amount of 
detergent is dispensed.

 to check the effectiveness of the rinse-aid, 

look at freshly washed glasses against the light. Drops of 
water remaining on the glass indicate an insufficient 
amount, while streaks on glass indicate an excess 
amount.

If changing to a 

(even one by the same manufacturer), you must rinse 
the suction and pressure hoses with fresh water before 
connecting the new detergent/rinse-aid container. Other-
wise, the mixing of different types of detergent/rinse-aid 
will cause crystallisation, which may result in a break-
down of the dosing pump. Failure to observe this condi-
tion will invalidate the warranty and product liability.

 This machine must be operated with an auto-

matic detergent feeder and, if applicable, an automatic 
chemical sanitizer feeder, including a visual means to 
verify that detergents and sanitizers are delivered or a 
visual or audible alarm to signal if detergents and saniti-
zers are not available for delivery to the respective 
washing an sanitizing systems. Please see instructions 
for electrical and plumbing connections located in this 
manual and in the feeder equipment manual.

-

+