Electrolux 506030 ユーザーズマニュアル

16

If the door is opened during this stage the message 
"CLOSE" will scroll on the display:

The filling and heating stage has finished when the 
display shows the tank temperature:

To display the boiler temperature during heating of the 
tank, open the door and press “J” button (Figure 12).

•

Tray rack: PW1M/WT830M/PW1MH/WT830MH = 
1 piece; PW2M/WT850M = 2 pieces.

•

Basket for pots and pans. 

The wash cycle includes one wash with hot water and 
detergent (158°F/70°C min.) and one rinse with hot 
water and rinse-aid (183°F/84°C min.).

Standard cycle time with supply water at 122°F/50°C.

A device lengthens the cycle time if the water in the boi-
ler has not reached the minimum temperature for correct 
rinsing.

The cycle times and the temperature may be personali-
sed (e.g. increase of the rinse time and temperature).

The cycle times should only be set by an Authorized 
Service technician.

The filling and heating stage has finished when the dis-
play shows the tank temperature:

The appliance is then ready for use:

•

Open the door.

•

Pour the required amount of detergent into the tank.

•

Insert the dirty pots and pans upside down on the 
basket (Figure 13/ Figure 14). 

•

Tie pots and pans with supplied rubber bands “S” as 
showed in Figure 13/ Figure 14.

Do not stack pots and pans one on top of 

another as water must have free access to all sides of 
every pot or pan.  Leave a minimum gap of 4" / 101 mm 
between pans and the edge of the rack (Figure 13/ 
Figure 14).

360 sec
360 sec
360 sec

600 sec
600 sec
600 sec

900 sec
900 sec
900 sec

INFINITE
INFINITE
INFINITE

4”

101 mm

4”

101 mm

4”

101 mm

4”

101 mm

S

4”

101 mm

4”

101 mm

4”

101 mm

4”

101 mm

S