Indesit NCAA 55 XX (UK) ユーザーズマニュアル

! Before placing your new appliance into operation 
please read these operating instructions carefully. They 
contain important information for safe use, for installation 
and for care of the appliance.
! Please keep these operating instructions for future 
reference. Pass them on to possible new owners of the 
appliance.

Positioning
1. Place the appliance in a well-ventilated humidity-free 

room.

2. Do not obstruct the rear fan grills. The compressor and 

condenser give off heat and require good ventilation to 
operate correctly and save energy.

3. Leave a space of at least 10 cm between the top part 

of the appliance and any furniture above it, and at least 
5 cm between the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat 

(direct sunlight, electric stove, etc.).

5. In order to maintain the correct distance between 

the appliance and the wall behind it, fit the spacers 
supplied in the installation kit, following the instructions 
provided.

Levelling
1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, make the 

necessary adjustments by tightening or loosening the 
single foot at the front of the appliance.

Electrical connections
After the appliance has been transported, carefully place 
it vertically and wait at least 3 hours before connecting it 
to the electricity mains. Before inserting the plug into the 
electrical socket ensure the following:

•  The appliance is earthed and the plug is compliant 

with the law.

•   The socket can withstand the maximum power of the 

appliance, which is indicated on the data plate located 
on the bottom left side of the fridge (e.g. 150 W).

•  The voltage must be in the range between the values 

indicated on the data plate located on the bottom left 
side (e.g. 220-240V).

•  The socket is compatible with the plug of the 

appliance. 

  If the socket is incompatible with the plug, ask an 

authorised technician to replace it (see Assistance). 
Do not use extension cords or multiple sockets.

! Once the appliance has been installed, the power 
supply cable and the electrical socket must be easily 
accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by 
authorised technicians only (see Assistance).