Liebherr FI1051 ユーザーズマニュアル

ページ / 18
w
The Child safety symbol
 Fig. 2 (13)
 lights up. 
c
 flashes
on the display.
When 
c0
 is shown on the display:
u
To switch off the child-proof lock, press the SuperFrost
button
 Fig. 2 (9)
 briefly.
w
The Child safety symbol
 Fig. 2 (13)
 goes out. 
c
 flashes
on the display.
u
Deactivate  setting  mode:  press  the  On/Off  button
Fig. 2 (8)
.
-or-
u
Wait 5 min.
w
The temperature is again displayed on the temperature
display.
5.4 Door alarm
If the door is open for longer than 180 seconds,
the acoustic warning sounds.
The acoustic warning stops automatically when
the door is closed.
5.4.1 Switching off the door alarm
The acoustic warning can be switched off when the door
is  open.  The  acoustic  warning  remains  switched  off  as
long  as  the  door  is  open.  When  the  door  is  closed,  the
alarm function is active again.
u
Press Alarm button
 Fig. 2 (10)
.
w
The door alarm stops.
5.5 Temperature alarm
If  the  freezer  temperature  is  not  cold  enough,
the audible warning sounds.
At the same time, the Alarm symbol
 Fig. 2 (4)
 will
flash.
The cause of a temperature being too high may be:
- Hot fresh food was placed in the appliance.
- When  sorting  and  removing  food  from  the  appliance,
too much warm ambient air got in.
- The power was cut off for a while.
- The appliance is faulty.
The  audible  warning  automatically  ceases,  the  Alarm
symbol
  Fig.  2  (4)
  goes  out,  and  the  temperature  display
stops  flashing  when  the  temperature  is  cold  enough
again.
If the alarm status remains: (see Troubleshooting).
Note
If the temperature is not cold enough, food may spoil.
u
Check the quality of the food. Do not consume spoiled
food.
5.5.1 Switching off the temperature alarm
The  acoustic  warning  can  be  switched  off.  When  the
temperature  is  cold  enough  again,  the  alarm  function  is
active again.
u
Press Alarm button
 Fig. 2 (10)
.
w
The acoustic warning ceases.
5.6 Sabbath Mode
After  entering  Sabbath  Mode,  you  do  not  have  to  worry
about  lights,  digits,  icons,  tones,  alarms  or  fans.  The
defrost  cycle  operates  solely  on  clock  time  without  any
feedback  from  usage  of  the  refrigerator.  After  a  power
failure, the appliance will return to Sabbath Mode without
requiring additional input.
WARNING
Danger of food poisoning!
No record will be kept of a power failure during Sabbath
Mode.  Thus,  during  Sabbath  mode,  if  a  power  failure
occurs that you are not aware of, when the power comes
back on, the unit will continue to be in Sabbath Mode but
when Sabbath Mode is ended there will be no indication
that a power failure occurred.
If a power failure occurs during Sabbath mode:
u
Check the quality of the food. Do not consume spoiled
food!
- No control operations are possible other than switching
off Sabbath Mode.
- If the unit is currently running in a mode such as Super-
frost,  Supercool  or  the  Ventilation  is  enabled  these
functions  will  continue  and  finish  their  timed  cycles
independent of now being in Sabbath mode.
- The Ice Maker is disabled.
- No  audible  signals  are  emitted,  and  the  temperature
display  does  not  indicate  any  warnings  or  settings
(such as a temperature alarm or door alarm).
5.6.1 Setting Sabbath mode
u
To  activate  setting  mode:  Press  and  hold  the  Super-
Frost button
 Fig. 2 (9)
 for approx. 5 s.
w
S
 flashes on the display.
w
The Menu symbol
 Fig. 2 (3)
 lights up.
u
To  access  the  Sabbath  mode  function:  Briefly  press
theSuperFrost button
 Fig. 2 (9)
.
When 
S1
 is shown on the display:
u
To  turn  on  Sabbath  mode,  briefly  press  the
SuperFrost button
 Fig. 2 (9)
.
When 
S0
 is shown on the display:
u
To  turn  off  Sabbath  mode,  briefly  press  the
SuperFrost button
 Fig. 2 (9)
.
u
To  deactivate  setting  mode:  Press  the  On/Off  button
Fig. 2 (8)
.
-or-
u
Wait 5 min.
w
The  Sabbath  Mode  symbol
  Fig.  2  (12)
  appears  on  the
temperature display as long as Sabbath Mode is active.
w
Sabbath  mode  switches  off  automatically  after  120
hours if it is not manually switched off beforehand.
Operation
8
* Depending on model and options