Liebherr 230311 7084644-00 ユーザーズマニュアル

Fire hazard and danger of damage!

u

Do  not  place  appliances  emitting  heat  e.g.  microwaves,

toasters etc. on the appliance!

Blocked ventilation openings pose a risk of fire and damage!

u

Always keep the ventilation openings clear. Always ensure

that the appliance is properly ventilated!

u

Detach the connecting cable from the rear of the appliance,

removing the cable holder at the same time because other-

wise there will be vibratory noise!

u

Remove  the  protective  film  from  the  outside  of  the  appli-

ance.*

The  stainless  steel  doors  are  provided  with  a  high-quality

surface  coating  and  must  not  be  treated  using  the  accompa-

nying care product.

Otherwise the surface coating will be affected. 

u

Wipe  the  coated  door  surfaces  using  a  soft,  clean  cloth

only.

u

Apply  a  stainless  steel  cleaner  only  to  the  stainless  steel

side  walls  evenly,  wiping  with  the  grain.  Subsequent

cleaning becomes easier as a result.

u

Wipe  side  walls  with  a  paint  finish  using  a  soft,  clean

cloth only.

u

Remove all transit supports.

u

Risk of damage due to condensate!

If your appliance is not a Side-by-Side (SBS) appliance:

u

do not install the appliance directly alongside a further refrig-

erator/freezer.

u

Align  the  appliance  so  that  it

stands firmly and on a level by

applying  the  accompanying

spanner  to  the  adjustable-

height  feet  (A)  and  using  a

spirit level.

When a Side-by-Side appliance (S…) is fitted together with

a second appliance (as a SBS combination):

u

Proceed  according  to  the  Side-by-Side  combined  fridge-

freezer installation instructions. (Accessories bag of the SBS

freezer/appliance with freezer compartment)

u

Clean the appliance (see 6.2) .

If  the  appliance  is  installed  in  a  very  damp  environment,

condensate may form on the outside of the appliance.

u

Always see to good ventilation at the installation site.

You can change over the door hinges if necessary.

Risk  of  damage  to  side-by-side  appliances  due  to  condensa-

tion!

When  a  side-by-side  appliance  (S…)  is  fitted  together  with  a

second  appliance  (as  a  SBS  combination),  the  door  hinges

must remain as delivered.

u

Do not change over the door hinges.

Ensure that the following tools are to hand:

q

Torx® 25

q

Torx® 15

q

Screwdriver

q

Cordless screwdriver, if necessary

q

Second person for fitting work, if needed

q

Accompanying Allen key size 2*

Fig. 4 

u

Close the door.

u

Pull off the cover

 Fig. 4 (10)

 forwards and upwards.

u

Lift off the cover

 Fig. 4 (11)

.

Risk of injury if the door tips!

u

Take good hold of the door.

u

Set down the door carefully.

u

Unscrew  the  upper  turn  hinge

  Fig.  4  (12)

(2x  Torx®  25)

Fig. 4 (13)

 and lift it off.

u

Lift off the door and set it aside.

Some appliances are height-adjustable, as can be noted from

the bearing pin in the lower turn hinge:

u

For  appliances  without

adjustment,

continue 

with 

item

u

For  appliances  with

continue  with  item  .