Electrolux AH 360-120 ユーザーズマニュアル

– Secure the hood to the wall using the 4 screws b

(Fig. 18).

– Establish the pipe connection.

– Establish the electrical connection.

– Extract the protective file from the chimney

paneling.

Note: Avoid damaging the sensitive stainless steel
surfaces.

– Fit the top of the chimney into the base. Make

sure that the fastening holes on the side are at the
top.

– Secure the top duct unit with 2 screws on the

ceiling holder.

– Pull the shoe down into its final position

(Fig. 19).

Note: Avoid scratches when fitting the elements
into one another by placing the assembly template,
for example, over the edge of the bottom chimney
paneling to protect it.

– Reinsert the grease filters.

– Place the 3 glass plates on the hood.

5750196934 en 08.01 SK

Fig. 18

Fig. 19