Electrolux AH 360-120 사용자 설명서
– Secure the hood to the wall using the 4 screws b
(Fig. 18).
– Establish the pipe connection.
– Establish the electrical connection.
– Extract the protective file from the chimney
paneling.
Note: Avoid damaging the sensitive stainless steel
surfaces.
surfaces.
– Fit the top of the chimney into the base. Make
sure that the fastening holes on the side are at the
top.
top.
– Secure the top duct unit with 2 screws on the
ceiling holder.
– Pull the shoe down into its final position
(Fig. 19).
Note: Avoid scratches when fitting the elements
into one another by placing the assembly template,
for example, over the edge of the bottom chimney
paneling to protect it.
into one another by placing the assembly template,
for example, over the edge of the bottom chimney
paneling to protect it.
– Reinsert the grease filters.
– Place the 3 glass plates on the hood.
5750196934 en 08.01 SK
15
Fig. 18
Fig. 19