Dacor DHI542 ユーザーズマニュアル

Determine the

11.

. To deter-

mine the required framework height:

Put the top framework piece over the bottom framework

12.

piece. The mounting slots on the top piece must be up.
Use four machine screws to fasten the top piece to

13.

the bottom piece. The total height of the two pieces

together must equal the required framework height

determined above.
Remove the protective plastic covering from both

14.

pieces of the chimney assembly. Do not remove the

protective tape strips from the inside. They protect the

telescoping pieces from scratching during installation.
Carefully slide both sections together so that only the

15.

vents on the top section show.
Hold the chimney vertically with the vents up.

16.

Carefully put the chimney over the top of the

17.

framework, taking care not to scratch the surfaces.

Make sure the Dacor logo faces the same side as the

control panel.
Make sure any wires are tucked in behind the chimney

18.

and are not pinched.

i

nsTallaTion

 i

nsTruCTions

Measure the distance from the ceiling to the

•

cooktop.
Subtract the height at which the hood will be

•

mounted (30” minimum) and the hood thickness

(12 1/2”) from the distance measured.