Dacor DHI542 ユーザーズマニュアル

i

nsTallaTion

 i

nsTruCTions

Do not use screws to attach the duct work to the

•

hood exhaust outlet. Use duct tape only. Screws may

prevent the damper flaps on the top of the hood from

opening.

Install the duct work system. Lift the chimney up

•

and reach inside the framework to access the hood

exhaust. Attach the duct to the hood exhaust with duct

tape alone. Use sheet metal screws (not provided) and

duct tape on all the remaining duct system joints.

To prevent personal injury, do not rely on the

•

mounting springs to hold the hood assembly in place

on the ceiling. Once the hood is hooked in place

IMMEDIATELY secure the framework to the mounting

bracket as described below.

Before raising the hood into position, lift it up and orient

1.

it so that the control panel faces the same direction as

the front of the cooktop or range.
Lift the hood assembly up on both sides and slip the

2.

end of the framework over the mounting bracket. Push

up until all four mounting springs protrude out of the

mounting slots on the top of the framework.
Attach the framework to the mounting bracket using

3.

four self-tapping screws.