Seagate ST446452W ユーザーズマニュアル
22
Elite 47 Installation Guide, Rev. B
Figure 3.
SCSI bus termination
Terminating the drive
ST446452W drives are terminated with permanently mounted IC
active terminators. If you install one of these drives and it is not
on the end of the SCSI bus, disable the terminators by removing
the TE jumper from pins 19 and 20 of connector J4A. If you
install the drive on the end of the SCSI bus, enable termination
by installing a jumper on pins 19 and 20 of connector J4A (see
Figure 4).
active terminators. If you install one of these drives and it is not
on the end of the SCSI bus, disable the terminators by removing
the TE jumper from pins 19 and 20 of connector J4A. If you
install the drive on the end of the SCSI bus, enable termination
by installing a jumper on pins 19 and 20 of connector J4A (see
Figure 4).
Internal
SCSI device
Internal
SCSI device
Controller
External
SCSI device
External
SCSI device
External
SCSI
cable
cable
Internal SCSI cable
Terminate
Internal
SCSI device
Internal
SCSI device
Controller
Internal SCSI cable
Terminate