Seagate ST446452W ユーザーズマニュアル
Elite 47 Installation Guide, Rev. B
23
Note. Use active (ANSI SCSI-2 Alternative 2) terminators when
terminating the bus.
Figure 4.
Terminating the drive
Terminator power
You usually will not need to change this option and can normally
leave the drive configured as it was shipped from the factory.
leave the drive configured as it was shipped from the factory.
There are three possible terminator power configurations for
ST446452W drives (see Figure 5). You will not normally need to
change this option and can leave the drive configured as it was
shipped from the factory.
ST446452W drives (see Figure 5). You will not normally need to
change this option and can leave the drive configured as it was
shipped from the factory.
Terminator Enabled (TE)
Terminator Disabled (TE)
Pin 19
J01
J4B
J4A
J4A
Pin 1
Pin 1
Pin 1