Seagate ST136403LW/LC ユーザーズマニュアル
32
Cheetah 36 Installation Guide, Rev. A
2.
Configure termination.
LC model drives are designed for installation in host sys-
tems that have a backplane with single connector attach-
ment (SCA) connections. Termination is normally provided
on this backplane. Check your host system documentation
for details.
tems that have a backplane with single connector attach-
ment (SCA) connections. Termination is normally provided
on this backplane. Check your host system documentation
for details.
Note. Host systems designed to use LC drives normally provide
termination power from the host adapter or other source.
LC model drives cannot be configured to provide termina-
tion power to the bus.
LC model drives cannot be configured to provide termina-
tion power to the bus.
• You can use this drive in host systems that do
not have a backplane with SCA connectors by
using a SCA to wide SCSI-2 adapter. These
using a SCA to wide SCSI-2 adapter. These
adapters separate the interface lines from the power lines. If
you use such an adapter, proceed with step 2 of the installa-
tion instructions provided for LW model drives.
you use such an adapter, proceed with step 2 of the installa-
tion instructions provided for LW model drives.