Frigidaire FGHB2844LF ユーザーズマニュアル

14

1.  Remove handles from carton and any other protective packaging.
2.  Position fresh food handle end over upper and lower pre-installed shoulder bolts (A) 

that are fastened into door, ensuring the holes for the set screws are facing towards the 

opposite door.  

3.  While holding handle firmly against door, fasten upper and lower Allen set screws (B)

with supplied Allen wrench.

4.  Repeat steps 2 and 3 to install opposite handle. Ensure the holes for the set screws are 

facing towards the first door.

5.  Position freezer handle end over left and right pre-installed handle mounts that are 

fastened to the door, ensuring the holes for the set screws are facing down.

6.  While holding handle firmly against door, loosely tighten far right Allen set screw (B) with supplied

Allen wrench until there is no gap between handle and door.

7.  Still holding the handle firmly to the door, firmly tighten far left Allen set screw (B) with supplied

Allen wrench.

8.  Return to the far right Allen set screw (B) and firmly tighten with supplied Allen wrench.
9.  Firmly tighten the inside Allen set screws.

Wear gloves and safety goggles. Use extreme CAUTION when installing these handles.