Furuno 2839S ユーザーズマニュアル
5-1
5.
INPUT/OUTPUT DATA
5.1
Radar Processor Unit
Input and output data are shown in the table below.
Input
Output
5.2
Processor Unit
Input and output data are shown in the table below.
Input
*: Data input cycle should be more than 40 Hz (HSC) or 20 Hz (normal ship speed).
Output
**: The output sentence, mode and baud rate can be set at the TT Preset menu.
Data
Specification
Contents
Remarks
Heading signal
sycrhro or step
GC-10 required
AD-10 format
External AD-100
Data
Specification
Contents
Remarks
Remote display signal HD, BP Trigger,
Video
2 ports
Data
Specification
Contents
Remarks
Heading signal
IEC61162-2*
Speed signal
IEC 61162-1 Ed.4
Navaid data
IEC 61162-1 Ed.4 Position, time and
date, datum, course,
speed, wind, current,
depth, temperature,
NAVTEX, etc.
speed, wind, current,
depth, temperature,
NAVTEX, etc.
AIS signal
IEC 61162-2
Alarm handling
signal
signal
Contact closure
Input from alarm system
IEC 61162-1 Ed.4
Input from alarm system
Data
Specification
Contents
Remarks
Radar system data IEC 61162-1 Ed.4
RSD, OSD
TT data**
IEC 61162-1 Ed.4
TTD, TTM, TLB
Alarm signal
IEC 61162-1 Ed.4
4 systems, Output content
are selected by menu.
are selected by menu.
Contact closure