Vertex Standard VX-8R ユーザーズマニュアル

9. Repeat steps 7 and 8 above to complete the message (up to

16 characters). If you make a mistake, press the 

 key to

move back to the incorrect character, then re-enter the cor-
rect character.

10. Press and hold in the 

 key for one second to delete all data after the cursor that

may have been previously stored.

11. When the Message entry is complete, press the 

 key

briefly to save the new setting.

12. If you wish to store another message, repeat steps 3 through

11 above.

13. Press the PTT switch to exit to normal operation.

(Requires all members set the same member list (includes own ID) into the same member
box in the same order.)

It is possible to register a maximum of 20 persons, in order to identify the sender.  When
you receive a message transfer, you will know who sent the message by the ID in the
register. In addition, your ID can be sent to the members when you transmit any messages
to them.

If all the members share the register information (ID), the message sender ID will be
shown on the display when receiving the message.

Even if no IDs are registered, the message function can work. However, in this case,
“MESSAGE1

MESSAGE1

MESSAGE1

MESSAGE1

MESSAGE1

” though “MESSAGE20

MESSAGE20

MESSAGE20

MESSAGE20

MESSAGE20

” will be displayed when receiving a message.

We recommend that you use your call sign for the member list.
1. Press and hold the 

 key for one second to enter the Set Mode.

2. Rotate the DIAL knob to select Set Mode Item 57: MES-

57: MES-

57: MES-

57: MES-

57: MES-

SAGE LIST

SAGE LIST

SAGE LIST

SAGE LIST

SAGE LIST

.

3. Press the 

 key briefly to enable adjustment of this Set

Mode Item.

4. Rotate the DIAL knob to select the desired member box (1

1

1

1

1

~ 20

20

20

20

20

) into which you wish to store a member ID. The LCD

will display the previously stored personal ID.

5. Press the 

 key briefly to enable programming of the

personal ID.

6. Press and hold in the 

 key for two seconds to clear the

previously stored personal ID, if desired.

7. Rotate the DIAL knob or press the keyboard to set the first