Vertex Standard VX-8R ユーザーズマニュアル
VX-8R O
PERATING
M
ANUAL
105
S
ENDING
A
M
ESSAGE
The registered message can be sent to the members who are receiving on the coordination
frequency. When a message is sent, the transmitter’s ID will be sent also, and the receiver
can identify who sent the message.
frequency. When a message is sent, the transmitter’s ID will be sent also, and the receiver
can identify who sent the message.
The “Personal ID” setting (described in the previous paragraph) is required for
the transmitter’s ID to be shown with the received message.
the transmitter’s ID to be shown with the received message.
1. Set the radio to the coordination frequency.
2. Press and hold the
2. Press and hold the
key for one second to enter the Set Mode.
3. Rotate the DIAL knob to select Set Mode Item 59: MES-
59: MES-
59: MES-
59: MES-
59: MES-
SAGE SELECT
SAGE SELECT
SAGE SELECT
SAGE SELECT
SAGE SELECT
.
4. Press the
key briefly to enable adjustment of this Set
Mode Item.
5. Rotate the DIAL knob to select the desired Message slot
you wish to send.
6. Press the PTT switch to exit to normal operation.
7. Press the
7. Press the
key, then press the
key. This provides a
“Short-cut” to Menu Item 95: SQL TYPE
95: SQL TYPE
95: SQL TYPE
95: SQL TYPE
95: SQL TYPE
.
8. Rotate the DIAL knob until “MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
” appears on the
display; this activates the Message feature.
9. Press the PTT switch to exit from the Menu mode and acti-
vate the Message feature. When the Message feature is ac-
tivated, the “MSG
tivated, the “MSG
MSG
MSG
MSG
MSG
” notation will appear on the display.
10. Press the PTT switch again (without speaking into the mi-
crophone) to transmit the selected message on the coordina-
tion frequency. It takes approximately 6 seconds to transmit the message.
tion frequency. It takes approximately 6 seconds to transmit the message.
M
ESSAGE
F
EATURE