Vertex Standard VX-8R ユーザーズマニュアル

VX-8R O

PERATING

ANUAL

12. When you wish to add a beep tone into the beep melody

strings, move the cursor to the place where you wish to en-
ter the beep tone using the

key, then press the

key repeatedly until the “SELECT

SELECT

” notation in the “Op-

eration Mode” slot turns into “INSERT

INSERT

”. Now, press and hold in the

key for one

second to add the new beep tone (Tone: “C2”, Tone Length: “500mS”).

13. Press and hold the

key for one second to delete all data after the current position

that may have previously been stored in the User Beep Melody.

14. When you have programmed User Beep Melody, press the PTT switch briefly to save

the new setting and exit to normal operation.

You may check your work by monitoring the programmed User Beep Melody.
To do this, repeat steps 1 - 4 above, then press the

key.

PLIT

ONE

PERATION

The VX-8R can be operated in a Split Tone configuration via the Set mode.

1. Press and hold the

key for one second to enter the Set Mode.

2. Rotate the DIAL knob to select Set Mode Item 94: SQL

94: SQL

SPLIT

3. Press the

key briefly to enable adjustment of this Set

Mode Item.

4. Rotate the DIAL knob to select “ON

” (to enable the Split

Tone feature).

5. Press the PTT switch briefly to save the new setting and

exit to normal operation.

When the Split Tone feature is activated, you can see the following additional parameters
after the “MESSAGE

MESSAGE

” parameter while selecting the Set Mode Item 95: SQL TYPE

95: SQL TYPE

D CD

DCS Encode only (“DC

” icon will appear while operating)

TONE-DCS

Encodes a CTCSS Tone and Decodes a DCS code
(the “T-D

T-D

” icon will appear during operation)

D CD-TONE SQL

: Encodes a DCS code and Decodes a CTCSS Tone

(the “D-T

D-T

” icon will appear during operation)

Select the desired operating mode from the selections shown above.

CTCSS/DCS/EPCS O

PERATION

CTCSS/DCS/EPCS B

ELL

PERATION