Vertex Standard VX-8R ユーザーズマニュアル

 (1750 H

)

If the repeaters in your country require a 1750-Hz burst tone for access (typically in Eu-
rope), you can set the 

 key to serve as a “Tone Call” switch instead. To change the

configuration of this switch, we again use the Menu to help us.

1. Press and hold the 

 key for one second to enter the Set Mode.

2. Rotate the DIAL knob to select Set Mode Item 61: MONI

61: MONI

61: MONI

61: MONI

61: MONI

/T-

T-

T-

T-

T-

CALL

CALL

CALL

CALL

CALL

.

3. Press the 

 key briefly to enable adjustment of this Set

Mode Item.

4. Rotate the DIAL knob to select “T-CALL

T-CALL

T-CALL

T-CALL

T-CALL

” on the display.

5. Press the PTT switch briefly to save the new setting and

exit to normal operation.

To access a repeater, press and hold in the 

 key for the amount

of time specified by the repeater owner/operator. The transmitter will automatically be
activated, and a 1750-Hz audio tone will be superimposed on the carrier. Once access to
the repeater has been gained, you may release the 

 key, and use the PTT switch for

activating the transmitter.