Vertex Standard VX-8R ユーザーズマニュアル

The large number of memories available in the VX-8R could be difficult to utilize without
some means of organizing them. Fortunately, the VX-8R includes provision for dividing
the memories into as many as 24 Memory Banks, so you can categorize the memories in a
manner convenient to you. You may enter and exit the “Memory Bank” mode by a single
press of the 

 key, as we shall see below.

1. Recall the memory channel to be assigned to a Memory

Bank.

2. Press and hold in the 

 key for 1/2 second, then rotate the

DIAL knob to select the Memory Bank number where you
want to include this channel (Memory Bank numbers are
found before memory channel “1

1

1

1

1

”). The “

” icon will ap-

pear at the upper left of the Memory Bank number if some
channels have already been assigned to that Memory Bank
number. (If no channels are assigned to the Memory Bank, the “

” icon appears on

the left of the Memory Bank number).

3. Press the 

 key briefly.

4. At this point, the memory

channel data is copied into
the Memory Bank.

1. Press the 

 key, if needed, to enter the MR mode.

2. Press the 

 key to activate the “Memory Bank” mode.

The “MR

MR

MR

MR

MR

” indicator will be replaced by one of the Memory

Bank numbers (“B 1

B 1

B 1

B 1

B 1

” through “B24

B24

B24

B24

B24

”).

3. Press the 

 key, and then press the 

 key,

then rotate the DIAL knob to select the desired
Memory Bank.

4. Press the 

 key. Now, as you rotate the DIAL

knob to select memories, you will observe that you
can only select memory channels in the current Memory Bank.

CH 1       145.000 MHz

CH 2       145.080 MHz

CH 3       435.000 MHz
CH 4       435.500 MHz

CH 5       145.800 MHz
CH 6       436.000 MHz

CH 7       128.800 MHz

CH 897   145.620 MHz
CH 898   436.780 MHz

CH 899   128.600 MHz

Air Band Channels

Club Channels

All Amateur Band Channels

144 MHz Amateur Band Channels

430 MHz Amateur Band Channels

 (R

)