Vertex Standard VX-8R ユーザーズマニュアル

Data stored on memory channels can easily be moved to VFO, if you like.

1. Press the 

 key, if needed, to enter the Memory Recall (“MR”) mode.

2. Press and hold in the 

 key for 1/2 second, then rotate

the DIAL knob to select the memory channel containing the
frequency data to be moved to VFO.

3. Press the 

 key. The confirmation message (OVER-

OVER-

OVER-

OVER-

OVER-

WRITE?

WRITE?

WRITE?

WRITE?

WRITE?

) will appear on the display. Press the 

 key once

more, the data will now have been copied to VFO, although
the original memory contents will remain intact on the pre-
viously stored channel. Press the PTT switch to cancel the
Moving Memory Data procedure, if desired.

Once memory channel programming has been completed, you may place the radio in a
“Memory Only” mode, whereby VFO operation is impossible. This may be particularly
useful during public-service events where a number of operators may be using the radio
for the first time, and ultimate simplicity of channel selection is desired.

To place the radio into the Memory Only mode, turn the radio off. Now press and hold in
the 

 key while turning the radio on.

To return to normal operation, repeat the above power-on procedure.

 (R

)