Vertex Standard VX-8R ユーザーズマニュアル

VX-8R O

PERATING

ANUAL

CANNING

EMORY

CANNING

Memory scanning is also easy to initiate:
1. Set the radio to the Memory Recall (“MR”) mode by pressing the

key, if neces-

sary.

2. Press and hold in the

key, then rotate the DIAL knob while holding in the

key (the current Memory Scan mode will appear on the fre-
quency display) to select the desired Memory Scan mode.
Available selections are ALL CHANNEL

ALL CHANNEL

, TAG1

TAG1

, TAG2

TAG2

BAND

, and PMS-X

PMS-X

ALL CHANNEL

: The scanner sweeps all Memory channels.

TAG1

The scanner sweeps only those Memory channels with the same first
digit of the alpha/numeric tag as the first channel on which scanning
started.

TAG2

The scanner sweeps only those Memory channels with the same first
and second digits of the alpha/numeric tag as the first channel on
which scanning started.

BAND

The scanner sweeps only those Memory channels which are memo-
rized on the same operating band as the first channel on which scan-
ning started.

PMS-X

The scanner will sweep frequencies within the currently-selected PMS
frequency pair. See page 68 for details.

3. Release the

key to start scanning.

4. As with VFO scanning, the scanner will halt on any signal encountered that is strong

enough to open the squelch; it will then resume scanning according to the Scan-Re-
sume mode set previously. When there are no memory channels corresponding to the
selected Memory Scan mode, the “MS ERR

MS ERR

” notation will appear on the display.

5. To cancel scanning, press the PTT switch or

key.

You may initiate the scanning in the previously selected Memory Scan Mode
by pressing and holding either

key for one second.