Vertex Standard VX-8R ユーザーズマニュアル

The VX-8R also allows you to set up a “Preferential Scan List” of channels which you can
“flag” within the memory system. These channels are designated by a blinking “W” icon
when you have selected them, one by one, for the Preferential Scan List. When you ini-
tiate memory scanning on a channel with the blinking “W” icon appended, only those
channels bearing the blinking “W” icon will be scanned. If you initiate scanning on a
channel which does not have the blinking “W” icon appended, you will scan all channels
including those with the blinking “W” icon appended.

Here is the procedure for setting up and using the Preferential Scan List:
1. Recall the Memory Channel which you wish to add to the

Preferential Scan List.

2. Press and hold the 

 key for one second to enter the Set

Mode.

3. Rotate the DIAL knob to select Set Mode Item 55: MEMORY

55: MEMORY

55: MEMORY

55: MEMORY

55: MEMORY

SKIP

SKIP

SKIP

SKIP

SKIP

.

4. Press the 

 key briefly to enable adjustment of this Set

Mode Item.

5. Rotate the DIAL knob to select “ONLY

ONLY

ONLY

ONLY

ONLY

”.

6. Press the PTT switch briefly to save the new setting and

exit to normal operation.

To initiate Preferential Memory Scan:
1. Press the 

 key briefly to enter the Memory Recall (“MR”) mode, if you are not

using memories already.

2. Rotate the DIAL knob to select any channel which has a

blinking “W” icon appended to the channel number.

3. Press and hold in the 

 key for one second to initiate

Preferential Memory Scanning. Only the channels which
have a blinking “W” icon appended to the channel number will be scanned.