Vertex Standard VM-3500E ユーザーズマニュアル
Page 51
VM-3500E
10.9 CHANNEL NAME CHANGE
This selection allows you to customize the name of a channel from the default
name.
name.
1. Press and hold down the [CALL(MENU)] key until
“
Radio Setup
” menu appears.
2. Press the [ENT] key, then select “
CH Name
” in the
“
Radio Setup
” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select the chan-
4. Turn the CHANNEL selector knob to select the chan-
nel to be named, then press the [ENT] key.
5. Press the one of the Keypad keys to enter the first
letter of the channel name.
Example: Press the [2(MEM)] key repeatedly to toggle
among the seven available charactors associated
with that key:
Example: Press the [2(MEM)] key repeatedly to toggle
among the seven available charactors associated
with that key:
A
B
C
a
b
c
2
.
6. Press the [ENT] key to enter the desired letter and
move the cursor one space to the right.
7. Repeat procedure until the name is complete. The
name can consist of up to twelve characters. If you
do not use all twelve character, press the [ENT] key
to move to the next space. To clear the previous let-
ter, press the [H/L(NAV)] key.
do not use all twelve character, press the [ENT] key
to move to the next space. To clear the previous let-
ter, press the [H/L(NAV)] key.
8. Press and hold the [ENT] key to enter the name and exit from the “
CH
Name
” menu. The LCD will return to the “
Radio Setup
” menu.
9. If you want to enter the name of another channel, repeat steps 3 through 8.
10. To exit this menu and return to radio operation mode press the [16/9] key.
10. To exit this menu and return to radio operation mode press the [16/9] key.