Vertex Standard VM-3500E ユーザーズマニュアル
VM-3500E
Page 52
10.10 UNIT NAMING
This selection allows you to provide the name to the radio and optional RAM+
Mic when connected.
Mic when connected.
1. Press and hold down the [CALL(MENU)] key until
“
Radio Setup
” menu appears.
2. Press the [ENT] key, then select “
Unit Name
” in the
“
Radio Setup
” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select the Unit
4. Turn the CHANNEL selector knob to select the Unit
(Radio or RAM1) to be named, then press the [ENT]
key.
key.
5. Press the one of the Keypad keys to enter the first
letter of the unit name.
Example: Press the [2(MEM)] key repeatedly to toggle
among the seven available charactors associated
with that key:
Example: Press the [2(MEM)] key repeatedly to toggle
among the seven available charactors associated
with that key:
A
B
C
a
b
c
2
.
6. Press the [ENT] key to enter the desired letter and
move the cursor one space to the right.
7. Repeat procedure until the name is complete. The
name can consist of up to twelve characters. If you
do not use all twelve character, press the [ENT] key
to move to the next space.
do not use all twelve character, press the [ENT] key
to move to the next space.
8. Press and hold the [ENT] key to enter the name and
exit from the “
Unit Name
” menu. The LCD will return to the “
Radio Setup
”
menu.
9. If you want to enter the name of another unit, repeat steps 3 through 8.
10. To exit this menu and return to radio operation mode press the [16/9] key.
10. To exit this menu and return to radio operation mode press the [16/9] key.