Uniden UM380BK ユーザーズマニュアル

8

English

Normal mode with both Weather Alert and Triple/Dual Watch 
You can activate Weather Alert Watch and  

Triple/ Dual Watch at the same time. The 

radio performs both checks at their 

scheduled time.

You can save channels into memory and 

then use scan mode to monitor those 

channels. When the radio detects a signal on a channel, it pauses on that channel as long as 

the signal is received; when the transmission stops, the radio will continue scanning.
  

In scan mode, you can get the  

following information from the 

display (some indicators will 

not always be displayed). 
Using the radio in scan 
mode  

 x

You cannot transmit while 

in scan mode. 

 x

You must have two or more channels in memory to start a scan. 

 x

To save a channel into memory, select the channel, then press and hold 

 for two 

seconds. Memory will show on the display. 

 x

To remove a channel from memory, set the radio to that channel, then press and hold 

 for two seconds. Memory will no longer show on the display. 

 x

To activate scan mode, press and hold 

. Press and hold 

 again to return 

to the previous mode. 

 x

When the radio automatically stops on a channel, press 

 to leave that channel 

and resume scanning. 

 x

To end the scan, press the microphone’s 

or 

 buttons. The 

radio remains on the last scanned channel. 

Every 7 seconds, 

the radio checks the most 

recently-used weather channel.

Every 2 seconds, 

the radio checks channels 9 & 16.

The radio scans about 

5 channels in 1 second.

When it detects a signal, the radio stays on the 
channel until you press the 

 button or the 

signal stops.

Resume scan

1 Watt 

USA

Memory

Scanning Channels
01A,05A,06,07A,08

Transmit power  

last used 

Channel mode 

(

USA, CANadian, 

or 

INTernational)

Current channel 

being scanned

Scan list (if the 

text is too long, 

the line scrolls)

All scanned 

channels must 

be in memory

Normal scan 

mode or Triple/ 

Dual-watch on

Status 

icons